HSE said that some MCWPs, or mast climbers, which rely on two independent motor drive units per mast to stop the platform from falling too quickly, are not fitted with suitable and sufficient controls to manage this risk. Platforms could fall from a height when mechanical faults in drive units go undetected. It added: “Failures in drive units can be such that neither the centrifugal brakes (intended to limit the speed of descent) nor the automatic brakes (intended to engage when powered travel is stopped) within the drive units can have an effect.
“Malfunctions in drive units which endangers proper function are foreseeable, and unless a means of detection of malfunctions is provided, there is a risk of platforms falling with overspeed.”
HSE advised construction companies to check that the necessary control measures are in place immediately for all MCWPs in use or available for use at work.
It warned that if control measures are not in place, companies should withdraw the MCWPs from use ahead of a thorough examination.
During the examination, companies should ensure that:
HSE also warned that it would take action against any businesses using MCWPs without appropriate controls.
Meanwhile, the International Powered Access Federation (IPAF) said it was working with its members to treat the issue as a priority.
It said: “IPAF has been made aware of a safety alert from the UK Health and SafetyExecutive regarding failure to detect mechanical failure in drive units which affects mast climbing work platforms. IPAF is working with the HSE, and itsMCWP members to address the issue raised in the alert as a priority and provide further information to support members as soon as this is available.
“The safety of anyone working with MCWPs and other powered access equipment is of the utmost importance to IPAF and its members globally. IPAF will work with its members and safety bodies globally to address any issue affecting this.”
[Original article published by Construction Management]